IEC Filtered Power Entry Modules

Available in IEC Inlet + Fuse + Switch | IEC Inlet + Fuse | IEC Inlet + Switch | Medical Grade and IP Rated Versions.

High reliability IEC Filtered Power Entry Modules combining C14 IEC inlet connector, filter, fuse (Ø 5 x 20 mm) & switch in a compact all-in-one solution. Excellent line to line & line to ground EMI suppression suitable for computer, industrial, telecom & medical applications. UL/CSA, TUV, VDE, CQC & CE safety compliance.
Please refer to datasheets or enquire for product specific options & safety approvals. 

MPSI provides all types of IEC Filtered Power Entry Modules, please contact us for types not shown here.

Power Entry Products & EMI Filters

  Key Features and Options:
 
Module Options:
IEC Inlet + Fuse (Single|Dual) + Switch
IEC Inlet + Fuse (Single|Dual)
IEC Inlet + Switch

Application Options:
Standard | High Performance
Medical Grade
IP65 Rated

Configuration Options:
Chassis Panel Mount | Snap Fit | Low Profile | Miniature
Output Terminals: 6.3mm Faston | 4mm Solder | Wire
Switch: Black Rocker. Red | Green Illuminated Available
Current Rating 1A – 10A, 115/250 VAC
Hipot Rating (Line-to-Line) 1450 VDC
Hipot Rating (Line-to-Ground) 2250 VDC
Optional Integrated Bleed Resistor and/or Ground Choke

IEC Inlet + Fuse + Switch

Image Part No / Specification Info
704-0002 Series   Power Entry Module | C14 IEC Inlet + Fuse + Switch | Panel Screw Mount | 6.3mm Faston Terminals | 125/150 VAC | 1A-10A Rated | VDE | CE Safety Certification adobe-dkblue3
704-0003 Series   Power Entry Module | C14 IEC Inlet + Fuse + Switch | Panel Screw Mount | 6.3mm Faston Terminals | 115/150 VAC | 1A-10A Rated | UL | TUV | CE | CQC Safety Certification adobe-dkblue3

IEC Inlet + Fuse

Image Part No / Specification Info
704-0001 Series   Power Entry Module | C14 IEC Inlet + Fuse | Panel Screw Mount | 6.3mm Faston Terminals | 125/150 VAC | 1A-10A Rated | UL | VDE | CE | CQC Safety Certification adobe-dkblue3
704-0008 Series   Power Entry Module | IP65 | C14 IEC Inlet + Fuse | Panel Screw Mount | 6.3mm Faston Terminals | 115/150 VAC | 1A-10A Rated | UL | VDE | CE | CQC Safety Certification adobe-dkblue3
704-0009 Filtered Power Entry Module, Fused, Snap-fit, Faston Tabs 704-0009 Series   Power Entry Module | C14 IEC Inlet + Fuse | Snap-Fit | 6.3mm Faston Terminals | 125/150 VAC | 1A-10A Rated | UL | VDE | CE | CQC Safety Certification adobe-dkblue3

Disclaimer: MPSI provides datasheets here for information purposes. We endeavour to keep these current but changes may occur without notice. In order to ensure receipt of current data, please contact MPSI. Technical data is believed to be accurate and is represented by MPSI in good faith based upon info provided by our manufacturers but MPSI assumes no responsibility for accuracy or completeness, any error in or omission from it or for any use made of it. Users of datasheets should satisfy themselves of product suitability for their application and not make any assumptions based on information included or omitted.