DIN 41612 Connectors

DIN 41612 CONNECTORS

Our manufacturing plant specialises in DIN 41612 Board Connectors, helping facilitate cost reduction on your application, consistently short lead-times and/or managed inventories.

Competitive, quality 2.54mm pitch DIN 41612 connectors available in Male, Female, Solder, Press-Fit, Wire-Wrap or IDC terminations. Our DIN 41612 connectors are available in standard number of ways and with a number of options on pin length, with both vertical & right angled 90° orientation. > Back to DIN 41612 / Board to Board Connectors.

MALE DIN 41612

104-0001
104-0001 DIN41612 2.54mm Male Connector, 90º, 3 Row, Solder Terminals
DIN 41612 Male Connector, 2.54mm Pitch, 90º, 3 Row, Solder Terminals, UL94V-0.
104-0002
104-0002 DIN41612 2.54mm Male Connector, 90º, 2 Row, Solder Terminals
DIN 41612 Male Connector, 2.54mm Pitch, 90º, 2 Row, Solder Terminals, UL94V-0.
104-0003
104-0003 DIN41612 2.54mm Male Connector, 180º, 2 Row, Solder Terminals
DIN 41612 Male Connector, 2.54mm Pitch, 180º, 2 Row, Solder Terminals, UL94V-0.

FEMALE DIN 41612

104-1001
104-1001 DIN41612 2.54mm Female Connector, 180º, Press-Fit
DIN 41612 Female Socket, 2.54mm Pitch, 180º, 3 Row, Press-Fit Termination, UL94V-0.
104-2001
104-2001 DIN41612 2.54mm Female Connector, 180º, 2 Row, Wire Wrap
DIN 41612 Female Socket, 2.54mm Pitch, 180º, 3 Row, Wire Wrap Termination, UL94V-0.
104-3001
104-3001 DIN41612 2.54mm Female Connector, 180º, 2 Row, IDC Termination
DIN 41612 Female Socket, 2.54mm Pitch, 180º, 2 Row, IDC Termination, UL94V-0.

> Back to DIN 41612 / Board to Board Connectors. MPSI provides the full range of DIN 41612 connectors, where types are not shown please contact us.

Disclaimer: Datasheets are provided for information purposes. Please validate with us to confirm latest revision. Data is believed to be accurate & represented by MPSI in good faith based upon info provided by our manufacturers. MPSI assumes no responsibility for accuracy or completeness, any error in or omission from it or for any use made of it. Users should satisfy themselves of suitability for their application and not make any assumptions based on information included or omitted. Thank you.